Zhejiang Aokai Electric Co.,Ltd

Boats Pump Parts Types Magnetic DC Contactor Relay

Product Description ADC125 -2T 12V/24V/36V/48V/60V/72V/84V/120VDC 125A Used in Elevator Parts Charging Pile Forklift Circuit Winch Relay DC Magnetic Contactor The ADC125-2T has been designed for direct current loads, particularly motors as used on small electric vehicles such as light industrial...

Send Inquiry
Product Details

Product Description
ADC125-2T 12V/24V/36V/48V/60V/72V/84V/120VDC 125A Used in Elevator Parts Charging Pile Forklift Circuit Winch Relay DC Magnetic Contactor
The ADC125-2T has been designed for direct current loads, particularly motors as used on small electric vehicles such as light industrial trucks. Developed for both interrupted and uninterrupted loads, the ADC125-2T is suitable for switching Resistive, Capacitive and Inductive loads.
Interrupted current - opening and closing on load with frequent switching (results in increased contact resistance). Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance). The ADC125-2T features double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The ADC125-2T is a monoblock construction, resulting in a neat compact design which is compatible with modern electronic control systems. The M8 stud main terminals can be configured in a variety of ways in order to suit the application. Supplied with a mounting bracket as standard, or alternatively supplied with M4 tapped holes. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to compensate for this.

Brand: AK/AOKAI
Name: DC Reversing Contactor
Model: ADC125-2T / DC92
Rated Voltage: DC12V/24V/36V/48V/60V/72V/84V/120V etc.

Rated Current: 125A

Working Duty: Continuous
Dimension: 65.5*97.5*100 (mm)
Weight: About 1020g

图片46.png

SPECIFICATION


 Coil Rated Voltage

DC12V, 24V, 36V, 48V, 60V, 72V, 84V, 120V etc.

 Main Circuit Rated Current (A)

125A

 Main Circuit Contact Voltage Drop (Load:100A)

 ≤80mV

 Under (20±5)℃ , Cooling Pull-in Voltage

≤70%

 Under (20±5)℃ , Cooling Drop-out Voltage

≥5%, ≤40%

 Acceptable Fluctuation Range of Coil Voltage

±20%

 Pull-in Time (N/O Contacts to Close)

≤30ms

 Drop-out Time (N/O Contacts to Open)

≤20ms

 The Max Disconnecting Time of Contacts

≤5ms

 Insulation Resistance

≥50MΩ

 Dielectric Strength

50Hz/60Hz 1000VAC/1min

 Overload Current

≤7Ie, ≤1s

 Coil Power Consumption (W)

≤11.0W

 Electrical Life

20,000 times

 Mechanical Life

300 Thousand times

 Working Mode

Continuous

 Contact Form

2 NO And 2 NC

 Contact Material

AgCdO / AgCuO

 Auxiliary Contact Rated Load (Optional Parts)

2A/48VDC, 5A/24VDC

 Technical Standard

GB14048.4-2010

USAGE ENVIRONMENT


     Altitude

≤2Km

Ambient Temperature

-25~+55℃

International Protection Grade

IP50

Installation Type

III

Way to Install

Any

Vibration

2.5g (5~50)Hz

Impact

50g,11ms (Half-Sine Wave)

SCHEMATIC DIAGRAM


QQ截图20161227132407.png




Aokai Electric is your best source for the high quality boats pump parts types magnetic dc contactor relay with CE certification. We have been one of the largest such manufacturers and suppliers in China since our establishment in 2008. Welcome to contact our factory for the products.

Inquiry