Zhejiang Aokai Electric Co.,Ltd

Recliner Mechanism Motor Electric Parts Changeover Switch DC Contactor

Recliner Mechanism Motor Electric Parts Changeover Switch DC Contactor

Send Inquiry
Product Details


Product Description

ADC100-D-CS DC88P 12V/24V/36V/48V/60V/72V/84V/120VDC 100A 2NO+2NC DPDT Long-Time Duty Screw Connection For Winch DC Reversing Contactor

The ADC100-D-CS series of contactors has been designed for direct current loads, particularly motors as used on electric vehicles such as industrial trucks. The ADC100-D-CS is a monoblock construction, resulting in a neat compact design which is compatible with modern electronic control systems. Developed for uninterrupted loads, it is suitable for switching Resistive, Capacitive and Inductive loads. It is sealed to IP67 thus offering greater protection against adverse environments such as water or dust.
 Interrupted current - opening and closing on load with frequent switching (results in increased contact resistance). •  Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance).
 It has double breaking main contacts with silver alloy contact tips, which are weld resistant, hard wearing and have excellent conductivity. M8 main stud terminals can be configured in a variety of ways in order to suit the application. Coil connections are by means of 6.3mm spades and mounting is via the supplied bracket and can be horizontal or vertical, when vertical the M8 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to compensate for this.


Brand: AK/AOKAI
Name: DC Reversing Contactor
Model: ADC100-D-CS / DC88P
Rated Voltage: DC12V/24V/36V/48V/60V/72V/84V/120V etc.
Rated Current: 100A

Working Duty: Continuous 

Connection Mode: Screw Type
Dimension: 100*63*96.7 (mm)
Weight: About 950g

图片18.png


SPECIFICATION



 Coil Rated Voltage

DC12V, 24V, 36V, 48V, 60V, 72V, 84V, 120V etc.

 Main Circuit Rated Current (A)

Continuous 100A

 Main Circuit Contact Voltage Drop (Load:100A)

 ≤80mV

 Under (20±5)℃ , Cooling Pull-in Voltage

≤70%

 Under (20±5)℃ , Cooling Drop-out Voltage

≥5%, ≤40%

 Acceptable Fluctuation Range of Coil Voltage

±20%

 Pull-in Time (N/O Contacts to Close)

≤30ms

 Drop-out Time (N/O Contacts to Open)

≤20ms

 The Max Disconnecting Time of Contacts

≤5ms

 Insulation Resistance

≥50MΩ

 Dielectric Strength

50Hz/60Hz 1000VAC/1min

 Overload Current

≤7Ie, ≤1s

 Coil Power Consumption (W)

Continuous≤10.0W

 Electrical Life

Continuous 30,000 times

 Mechanical Life

300 Thousand times

 Working Mode

Continuous

 Contact Form

2 NO and 2 NC

 Contact Material

AgCdO / AgCuO

 Start Current

≤4A

 Technical Standard

GB14048.4-2010

USAGE ENVIRONMENT


     Altitude

≤2Km

Ambient Temperature

-25~+55℃

International Protection Grade

IP67

Installation Type

III

Way to Install

Any

Vibration

2.5g (5~50)Hz

Impact

50g,11ms (Half-Sine Wave)

SCHEMATIC DIAGRAM


INSTALLATION DIAGRAM

Aokai Electric is your best source for the high quality 1no 36v dc uninterruptible power supply parts relay with CE certification. We have been one of the largest such manufacturers and suppliers in China since our establishment in 2008. Welcome to contact our factory for the products.

Related Products
Inquiry