Zhejiang Aokai Electric Co.,Ltd

125A Emergency Stop Metal Push Pull Button Switch 12 Volt

Product Description AED125A 125A 80V Push Button for Battery Powered Vehicles 1N C AOKAI Emergency Switch The AED125A range of switches have been designed to provide a rapid means of disconnecting batteries or other power supplies in the event of serious electrical faults. Whilst the switches...

Send Inquiry
Product Details

Product Description
AED125A 125A 80V Push Button for Battery Powered Vehicles 1NC AOKAI Emergency Switch
 The AED125A range of switches have been designed to provide a rapid means of disconnecting batteries or other power supplies in the event of serious electrical faults. Whilst the switches are primarily intended for use with battery powered vehicles they are also suitable for use with static power systems. All types are capable of safely rupturing full load battery currents in the event of an emergency.
 The AED125A is a manually operated device with an over-centre spring mechanism which provides a snap action for both opening and closing of the main contacts. The AED125A is easy to install (see drilling details) and is secured with supplied M5 posidrive mounting screws.  Lockable versions feature a key which is necessary for the knob to be moved from the “Off” position to the “On” position. Once in the “On” position, the key can be removed. Thereafter, the knob may be depressed to the “Off” position where it will automatically lock and remain locked until the key is used again to unlock it. The AED125A is fully serviceable with genuine replacement parts available.
 Precautions:
When fitted with magnetic blowouts the polarity marked on the contact housing must be observed when connecting the main terminals.  Ensure that the switches are installed in a position where heavy arcs emanating from the switch cannot damage or electrically jump across to adjacent parts. The switch is to be used to rupture current in an emergency or as a no-load isolator.
 Do not use as a regular On-Load Switching Device.

Brand: AK/AOKAI
Name: Emergency Switch
Model: AED125A / ED125
Rated Voltage: ≤80V
Rated Current: 125A
Type: Push Button
Dimension: 55.7*43.5*110 (mm)
Weight: About 320g

图片45.png

SPECIFICATION


     Rated Voltage

≤80V

Contact Circuit Rated Load Current(A)

125A

Typical Voltage Drop Across Contacts per 100A

≤80mV

Insulation Resistance

≥50MΩ

Electric Strength to Resist

50Hz/60Hz 1000VAC/1min

Overload Current

≤7Ie, ≤1s

Electric Life

≥10000 times

Mechanical Life

50,000 times

Work Specification

Continuous

Contact Form

1NC

Contact Material

AgCdO/AgCuO

Technical Specification

GB14048.4-2010

USAGE ENVIRONMENT


     Altitude

≤2Km

Ambient temperature

-25~+55℃

International protection

IP50

Installation type

III

Way to install

Any

Vibration

2.5g(5~50)Hz

Impact

50g,11ms(Half-sine wave)



SCHEMATIC DIAGRAM


INSTALLATION DIAGRAM



Aokai Electric is your best source for the high quality 125a emergency stop metal push pull button switch 12 volt with CE certification. We have been one of the largest such manufacturers and suppliers in China since our establishment in 2008. Welcome to contact our factory for the products.

Related Products
Inquiry