Product Description
ADC100-D-CP DC88P 12V/24V/36V/48V/60V/72V/84V/120VDC 100A 2NO+2NC DPDT Long-Time Duty Insert Connection For Winch DC Reversing Contactor
Application:
The ADC100-D-CP motor reversing type of contactors has been designed for direct current loads, particularly motors as used on electric vehicles such as industrial trucks. It is a monoblock construction, resulting in a neat compact design which is compatible with modern electronic control systems. Developed for uninterrupted loads, this contactor is suitable for switching Resistive, Capacitive and Inductive loads. It is sealed to IP67 thus offering greater protection against adverse environments such as water or dust.
Interrupted current - opening and closing on load with frequent switching (results in increased contact resistance) Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance)
| Brand: AK/AOKAI Name: DC Reversing Contactor Model: ADC100-D-CP / DC88P Rated Voltage: DC12V/24V/36V/48V/60V/72V/84V/120V etc. Rated Current: 100A Working Duty: Continuous |
|
SPECIFICATION
Coil Rated Voltage | DC12V, 24V, 36V, 48V, 60V, 72V, 84V, 120V etc. |
Main Circuit Rated Current (A) | Continuous 100A |
Main Circuit Contact Voltage Drop (Load:100A) | ≤80mV |
Under (20±5)℃ , Cooling Pull-in Voltage | ≤70% |
Under (20±5)℃ , Cooling Drop-out Voltage | ≥5%, ≤40% |
Acceptable Fluctuation Range of Coil Voltage | ±20% |
Pull-in Time (N/O Contacts to Close) | ≤30ms |
Drop-out Time (N/O Contacts to Open) | ≤20ms |
The Max Disconnecting Time of Contacts | ≤5ms |
Insulation Resistance | ≥50MΩ |
Dielectric Strength | 50Hz/60Hz 1000VAC/1min |
Overload Current | ≤7Ie, ≤1s |
Coil Power Consumption (W) | Continuous≤10.0W |
Electrical Life | Continuous 30,000 times |
Mechanical Life | 300 Thousand times |
Working Mode | Continuous |
Contact Form | 2 NO and 2 NC |
Contact Material | AgCdO / AgCuO |
Start Current | ≤4A |
Technical Standard | GB14048.4-2010 |
USAGE ENVIRONMENT
Altitude | ≤2Km | Ambient Temperature | -25~+55℃ |
International Protection Grade | IP67 | Installation Type | III |
Way to Install | Any | Vibration | 2.5g (5~50)Hz |
Impact | 50g,11ms (Half-Sine Wave) | ||
SCHEMATIC DIAGRAM
INSTALLATION DIAGRAM
Aokai Electric is your best source for the high quality excavator parts dc relay with CE certification. We have been one of the largest such manufacturers and suppliers in China since our establishment in 2008. Welcome to contact our factory for the products.
