Product Description
AZJ600S / AZJ600D 12V/24V/36V/48V/60V/72V/84V/120VDC 600A Used in Car Battery AOKAI DC Contactor
AZJ600 series have two types contactor, one is single coil AZJ600S, which is suitable for the intermittent working, one is double coils AZJ600D, which is suitable for the continuous working. You can choose the right one according to your usage.
FAQ:
Q: What is a contactor?
A: A contactor is an electrically controlled switch used for switching an electrical power circuit, similar to a relay except with higher current ratings. A contactor is controlled by a circuit which has a much lower power level than the switched circuit.
Q: What’s the application of the contactors?
A: Contactors are used to control electric motors, lighting, heating, capacitor banks, thermal evaporators, and other electrical loads.
Q: Are AOKAI DC contactors UL rated?
A: Yes. AOKAI DC contactors are UL rated.
| Brand: AK/AOKAI Name: DC Contactor Model: AZJ600S / BZJ600S / MZJ600D Rated Voltage: DC12V/24V/36V/48V/60V/72V/84V/120V etc. Rated Current: 600A Coil: Single Coil Dimension: 122*81.5*130 (mm) Weight: About 1750g |
|
Brand: AK/AOKAI |
|
SPECIFICATION
Coil Rated Voltage | DC12V, 24V, 36V, 48V, 60V, 72V, 84V, 120V etc. |
Main Circuit Rated Current (A) | 600A |
Main Circuit Contact Voltage Drop (Load:100A) | ≤80mV |
Under (20±5)℃, Cooling Pull-in Voltage | ≤70% |
Under (20±5)℃, Cooling Drop-out Voltage | ≥5%, ≤40% |
Acceptable Fluctuation Range of Coil Voltage | ±20% |
Pull-in Time (N/O Contacts to Close) | ≤30ms |
Drop-out Time (N/O Contacts to Open) | ≤20ms |
The Max Disconnecting Time of Contacts | ≤5ms |
Insulation Resistance | ≥50MΩ |
Dielectric Strength | 50Hz/60Hz 1000VAC/1min |
Overload Current | ≤7Ie, ≤1s |
Coil Power Consumption (W) | AZJ600S: ≤12.0W |
AZJ600D: Start≤250W, Hold≤8.0W | |
Electrical Life | 20,000 times |
Mechanical Life | 300 Thousand times |
Working Mode | Continuous |
Contact Form | 1 NO |
Contact Material | AgCdO / AgCuO |
Auxiliary Contact Rated Load (Optional Parts) | 2A/48VDC, 5A/24VDC |
Technical Standard | GB14048.4-2010 |
USAGE ENVIRONMENT
Altitude | ≤2Km | Ambient Temperature | -25~+55℃ |
International Protection Grade | IP50 | Installation Type | III |
Way to Install | Any | Vibration | 2.5g (5~50)Hz |
Impact | 50g,11ms (Half-Sine Wave) | ||
SCHEMATIC DIAGRAM
INSTALLATION DIAGRAM
Aokai Electric is your best source for the high quality 1no 36v dc uninterruptible power supply parts relay with CE certification. We have been one of the largest such manufacturers and suppliers in China since our establishment in 2008. Welcome to contact our factory for the products.
