Product Description
ADC200-DE-CP 12V/24V/36V/48V/60V/72V/84V/120VDC 200A 2NO+2NC DPDT Short-Time Duty Insert Connection For Winch DC Reversing Contactor
The ADC200-DE-CP is a compact contactor following the established design of our mono block contactors, configured specifically for motor reversing. Suitable for Direct Current loads and compatible with modern electronic control systems, the ADC200-DE-CP is sealed to IP67 and is ideal for use in applications such as battery powered winches, vehicle mounted cranes and small electric vehicles. Devised for interrupted loads, it is suitable for switching Resistive, Capacitive and Inductive loads.
The ADC200-DE-CP has double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The it has M6 main stud terminals and coil connections are by means of 6.3mm spades.
| Brand: AK/AOKAI Name: DC Reversing Contactor Model: ADC200-DE-CP / DC66P Rated Voltage: DC12V/24V/36V/48V/60V/72V/84V/120V etc.Rated Current: 200A Working Duty: Intermittent |
|
SPECIFICATION
| Coil Rated Voltage | DC12V, 24V, 36V, 48V, 60V, 72V, 84V, 120V etc. |
Main Circuit Rated Current (A) | Intermittent 200A |
Main Circuit Contact Voltage Drop (Load:100A) | ≤80mV |
Under (20±5)℃, Cooling Pull-in Voltage | ≤70% |
Under (20±5)℃, Cooling Drop-out Voltage | ≥5%, ≤40% |
Acceptable Fluctuation Range of Coil Voltage | ±20% |
Pull-in Time (N/O Contacts to Close) | ≤30ms |
Drop-out Time (N/O Contacts to Open) | ≤20ms |
The Max Disconnecting Time of Contacts | ≤5ms |
Insulation Resistance | ≥50MΩ |
Dielectric Strength | 50Hz/60Hz 1000VAC/1min |
Overload Current | ≤7Ie, ≤1s |
Coil Power Consumption (W) | Intermittent≤28.0W |
Electrical Life | Intermittent 5,000 times |
Mechanical Life | 300 Thousand times |
Working Mode | Intermittent |
Contact Form | 2 NO and 2 NC |
Contact Material | AgCdO / AgCuO |
Start Current | ≤4A |
Technical Standard | GB14048.4-2010 |
USAGE ENVIRONMENT
Altitude | ≤2Km | Ambient Temperature | -25~+55℃ |
International Protection Grade | IP67 | Installation Type | III |
Way to Install | Any | Vibration | 2.5g (5~50)Hz |
Impact | 50g,11ms (Half-Sine Wave) | ||
SCHEMATIC DIAGRAM
INSTALLATION DIAGRAM
Aokai Electric is your best source for the high quality 12vdc reversing contactor solenoid relay for winch with CE certification. We have been one of the largest such manufacturers and suppliers in China since our establishment in 2008. Welcome to contact our factory for the products.
